Heavy Duty Selector Grabs


The KINSHOFER heavy duty selector grabs are a proven concept that can be applied widely for demolition, recycling and other applications. The grabs are characterized by their extremely powerful closing strength and the robust construction of the yoke thanks to a Delta-box frame with wide pivotal points using bearings and over-dimensioned pins and bearings.

The Delta-box frame in combination with a single large diameter cylinder - for powerful closing - ensures low reactive forces at the hinging points. The application of a single, hydraulically cushioned cylinder makes the grab easy to service and reliable because of the simplicity of the hydraulic system. The shells are equipped with a perforated shell plate made of high-grade material as standard. This construction gives extra torsion rigidity to the shells, prevents material getting stuck in the shells and gives optimal visibility on the job.

Side plates and reversible, divided bottom blades are manufactured of extra thick, durable material. The divided bottom blades can also be interchanged up to 3 times (starting from D19H-P-HD) so that wear at the corners can be dealt with and wearing-material is not wasted unnecessarily.

Starting from D32H-P-HD, the heavy duty selector grabs are equipped with twin rotation motors, the smaller versions can be upgraded optionally. Standard is an integrated rotation with sturdy slewing ring.
The application of the standard load safety valve in the grabs open/close circuit ensures safety during operation. Overheating of the oil is avoided and the machine keeps up its cycle speed.

Accessories such as side plates and different adapters are available for the D-HD-series.

D15H-P-75HD available for excavators with 10 to 18t / 22000 to 39600 lbs with a width of 750 mm / 29.53 in at an opening of 1730 mm / 68.11 in and a load capacity of 5000 kg / 11000 lbs as package including: selector grab, cutting edges, integrated rotation and non-return valve.
D16H-P-90HD available for excavators with 12 to 20t / 26400 to 44000 lbs with a width of 900 mm / 35.43 in at an opening of 1730 mm / 68.11 in and a load capacity of 5500 kg / 12100 lbs as package including: selector grab, cutting edges, integrated rotation and non-return valve.
D19H-P-85HD available for excavators with 12 to 24t / 26400 to 52800 lbs with a width of 850 mm / 33.46 in at an opening of 1725 mm / 67.91 in and a load capacity of 6500 kg / 14300 lbs as package including: selector grab, cutting edges, integrated rotation and non-return valve.
D20H-P-100HD available for excavators with 13 to 25t / 28600 to 55000 lbs with a width of 1000 mm / 39.37 in at an opening of 1865 mm / 73.43 in and a load capacity of 7000 kg / 15400 lbs as package including: selector grab, cutting edges, integrated rotation and non-return valve.
D24H-P-100HD available for excavators with 15 to 30t / 33000 to 66000 lbs with a width of 1000 mm / 39.37 in at an opening of 1970 mm / 77.56 in and a load capacity of 8000 kg / 17600 lbs as package including: selector grab, cutting edges, integrated rotation and non-return valve.
D32H-P-110HD available for excavators with 20 to 40t / 44000 to 88000 lbs with a width of 1100 mm / 43.34 in at an opening of 2190 mm / 86.22 in and a load capacity of 10500 kg / 23100 lbs as package including: selector grab, cutting edges, integrated rotation with 2 motors and non-return valve.
D40H-P-125HD available for excavators with 25 to 50t / 55000 to 110000 lbs with a width of 1250 mm / 49.21 in at an opening of 2325 mm / 91.54 in and a load capacity of 13500 kg / 29700 lbs as package including: selector grab, cutting edges, integrated rotation with 2 motors and non-return valve.
D50H-P-140HD available for excavators with 35 to 60t / 77000 to 132000 lbs with a width of 1400 mm / 55.12 in at an opening of 2325 mm / 91.54 in and a load capacity of 16500 kg / 36300 lbs as package including: selector grab, cutting edges, integrated rotation with 2 motors and non-return valve.
D70H-P-150HD available for excavators with 50 to 80t / 110000 to 176000 lbs with a width of 1500 mm / 59.05 in at an opening of 2700 mm / 106.30 in and a load capacity of 23500 kg / 51700 lbs as package including: selector grab, cutting edges, integrated rotation with 2 motors and non-return valve.

Demolition and Sorting Grab
Demolition and Sorting Grab
Demolition Grab
Demolition Grab
Sorting Grab
Sorting Grab
Selector Grab
Selector Grab
Selector Grabs
Selector Grabs
D70H-P-150HD
D70H-P-150HD
Shells
Shells
Twin-Motors
Twin-Motors
Previous Next Play Pause

D15 Demolition and Sorting Grab
D15 Demolition and Sorting Grab
D15H-P-75HD-Action-(2)
D15H-P-75HD-Action-(2)
D19H-P-85HD Selector Grab
D19H-P-85HD Selector Grab
D19H-P-85HD-Side-Walls
D19H-P-85HD-Side-Walls
D24H-P-100HD-Action-(1)
D24H-P-100HD-Action-(1)
Kinshofer Demolition Grab
Kinshofer Demolition Grab
D24H-P-100HD-Action-(3)
D24H-P-100HD-Action-(3)
D40H Selector Grab
D40H Selector Grab
D40H-P-125HD-Action-(2)
D40H-P-125HD-Action-(2)
D40H-P-125HD-Action-(3)
D40H-P-125HD-Action-(3)
D40H-P-125HD-Action-(4)
D40H-P-125HD-Action-(4)
D40H-P-125HD-Action-(5)
D40H-P-125HD-Action-(5)
Kinshofer Selector Grabs
Kinshofer Selector Grabs
D40H-P-125HD-Action-(7)
D40H-P-125HD-Action-(7)
D40H-P-125HD-Action-(8)
D40H-P-125HD-Action-(8)
Sorting Grab
Sorting Grab
D50H-P-140HD-Action
D50H-P-140HD-Action
Previous Next Play Pause

D24H-P-100HD Selector Grab

D32H-P-110HD Selector Grab

D50H-P-140HD Selector Grab

Heavy Duty Demolition and Sorting Grabs
D-Series Demolition and Sorting Grabs

 

Ask about this product