KINSHOFER has developed a range of tools especially adapted to the NOX-Tiltrotator to guarantee the best efficiency available.
Besides the clamshell buckets, demolition and sorting grabs, compactors and forks that KINSHOFER is offering for the NOX-Tiltrotator, there are various other combinations possible. Mount a SLA brush cutter to your tiltrotator and the clearing of rail- or roadsides, slopes etc. can be manages easily and fast. The general working is much more efficient and fast, because you can work precisely – e.g. when positioning natural rocks for a wall – without repositioning the excavator all the time.
For the NOX types TR06NOX, TR10NOX and TR19NOX there is also the possibility to add a gripper to the tiltrotator – available as flat cassette or integrated into the quick coupler – that can be used to position rods, poles or curbstones, while the other attachment remains mounted. For these three sizes, KINSHOFER is also offering a preset bucket package, each including a suitable grading, backhoe and trench bucket.
There are many more attachments suitable for the NOX-Tiltrotators, of course, from buckets via brooms and brushes up to special solutions.
Attachments and Grippers for NOX
TRG06 gripper for TR06NOX featuring a load capacity of 300 kg / 660 lbs and an opening of 415 mm / 16.34 in at 1.5 seconds closing time at 25 l/min / 6.61 GPM.
TRG10 gripper for TR10NOX featuring a load capacity of 500 kg / 1100 lbs and an opening of 615 mm / 24.21 in at 1.3 seconds closing time at 25 l/min / 6.61 GPM.
TRG18 gripper for TR19NOX featuring a load capacity of 900 kg / 1980 lbs and an opening of 713 mm / 28.07 in at 1.7 seconds closing time at 25 l/min / 6.61 GPM.
NOX-Tiltrotator with Different Attachments on a Road-Rail Excavator
TR18NOX Tiltrotator with Gripper
NOX-Tiltrotator with SKP Grading Bucket on a Road-Rail Excavator