Clamshell Buckets with Vertical Cylinder


The KINSHOFER clamshell buckets with vertical cylinders are the ideal tools for earthwork and trenches. A good digging behaviour is guaranteed be the high closing pressure. Cutting edges made of 500 HB steel and a generously dimensioned bearing system contribute to the longevity of the grapples. The durable hydraulic cylinder is fully enclosed in the hub unit and thus well protected from blows.

For the excavation of foundations and graves, the C08F is equipped with a scraper.
 
Bolt-on digging teeth can easily be exchanged if required. Alternatively to the clamshell buckets with vertical cylinder, a clamshell bucket with HPXdrive can be used with an extension for excavating.

A wide range of accessories is available for all clamshell buckets.

C08V available for excavators with 4 to 8t / 8800 to 17600 lbs in volumes 115 up to 300 litres / 0.15 to 0.39 c.y. ranging in widths from 325 up to 800 mm / 12.80 up to 31.50 in as package inlcuding: clamshell bucket, bolt-on teeth, rotator, short hoses, non-return valve and hose guard.

C08F available for excavators with 4 to 8t / 8800 to 17600 lbs in volumes 100 up to 200 litres / 0.13 to 0.26 c.y. in the widths 600 and 760 mm / 23.62 and 29.92 in as package inlcuding: clamshell bucket, bolt-on teeth, rotator, short hoses, non-return valve, hose guard and scraper.

C08F-(1)
C08F-(1)
C08F-(2)
C08F-(2)
C08V-(1)
C08V-(1)
C08V-(2)
C08V-(2)
Previous Next Play Pause

C08F with Scraper
C08V
Ask about this product