Every builder wants a structure which is in compliance with relevant standards and safety regulations - even beyond the contractually agreed indemnity period! Thanks to the BRC Foundation Pile Milling Head there is no spalling of the pile head - especially on the pile edge, no fissures, and no bent steel reinforcement bars! The load capacity of the pile is thus preserved, the risk of corrosion minimized, and there are no negative effects on the static strength of pile!
The BRC Foundation Pile Milling Head consists of a 30,000MAX earth drill – made by Auger Torque, a member of the KINSHOFER Group − an intermediate link, and a basic carrier that can be equipped with
different inside and outside milling teeth.
The BRC is mounted to an hydraulic excavator and there is no need for manual work during the removing process. The milling head first breaks the core tension insider and the surface tension outside of
the pile without damaging the pile and the steel reinforcements. The inner milling head mills the concrete inside the reinforcement ring up to a depth of 1800mm, and the outer milling head mills the outside of the ring.
After the milling process, the concrete ring with intact reinforcements remains. The concrete can now be broken from in between the reinforcements with a concrete shear.
The result is a reinforced concrete pile with undamaged and clean connection reinforcements for further construction process. Working in narrow and deep wells is also no problem with the BRC as all the work is done "from above". The BRC saves time and money and a cost-intensive and tedious finishing process as before the BRC is no longer necessary.
Here you can find and download the flyer with every important fact about our new series!
You would like to have some more information? Just contact our product manager for the milling heads:
Tel.: +49 (0)171 335 33 29