Pallet Forks for Crane

...with manual shifting and adjustable height and tines. The sturdy KINSHOFER pallet fork with mechanical center of gravity compansation can easily be adapted to different loads with adjustable throat height and tine spread.

An efficient handling of many different kinds of loads – palletised and unpalletised. The tool is easy to use due to its dimensions since no part of the pallet fork is wider than a standard pallet, so loads close to walls can be handled without any problems.

… with self-shifting and adjustable height and tines. The newest in our pallet fork line, the KM 420 incorporates the spring loaded centre of gravity style top arm with the versatility of various lower sections to accommodate your needs.

It has been designed for handling palletized and unpalletized loads of building material or stacked loads of concrete blocks.

The Travel can be preset depending on the centre of gravity of the load to be picked up. Compression springs return the slide to its original position after the load is removed.

KM 416 available with 4,500 lbs load capacity and D-style tines (roofers = thinner tines) and 6,000 lbs load capacity with tine styles A (standard), B (block = 6 tines instead of 2) or C (offset tines for easier slide out of pallet), with throat height 48 to 68 in.

KM 420 available with 4,500 lbs load capacity and D-style tines (roofers = thinner tines) and 6,000 lbs load capacity with tine styles A (standard), B (block = 6 tines instead of 2) or C (offset tines for easier slide out of pallet), with throat height 48 to 68 in or 60 to 90 in.